| Технические данные — электрические параметры | |
|---|---|
| Voltage supply | 10…30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | 50 mA (24 VDC) |
| Initializing time typ. | 250 ms after power on |
| Interface | CANopen® |
| Function | Multiturn |
| Transmission rate | 10…1000 kBaud |
| Operating mode | Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) |
| Identifier | 11 bit |
| Steps per turn | 262144 / 18 bit |
| Number of turns | 16384 / 14 bit |
| Absolute accuracy | ±0.025 ° |
| Sensing method | Optical |
| Code | Binary |
| Code sequence | CW/CCW programmable |
| Output stages | CAN bus standard ISO / DIS 11898 |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Programmable parameters |
Operating modes Total resolution Scaling Rotation speed monitoring |
| Diagnostic functions | Position or parameter error Multiturn sensing |
| Approval | UL approval / E301461 |
| Технические данные — механические параметры | |
| Size (flange) | 70 mm |
| Shaft type | 10 mm solid shaft (clamping flange) |
| Flange | Clamping flange |
| Protection DIN EN 60529 | IP 67 |
| Operating speed | 6000 rpm (mechanical) 6000 rpm (electric) |
| Starting acceleration | 1000 U/s |
| Starting torque | 0.4 Nm |
| Shaft loading | 60 N axial 50 N radial |
| Materials | Housing: stainless steel Flange: stainless steel |
| Operating temperature | -25…+60 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
| Explosion protection | Ex II 2G Ex d IIC T6 Ex II 2D |
| Weight approx. | 1300 g |
| Connection | Cable 2 m (other length upon request) |
| Артикул | Наименование | Примечание | |
|---|---|---|---|
| X700.P1112A5 | Абсолютный энкодер | Официальные поставки из Германии | Заказать |