| Technical data — electrical ratings | |
|---|---|
| Voltage supply | 5 VDC ±10 % 4.75…30 VDC |
| Reverse polarity protection | Yes (4.75…30 VDC) |
| Consumption w/o load | 30 mA (24 VDC) 60 mA (5 VDC) |
| Pulses per revolution | 5…6000 |
| Sensing method | Optical |
| Output frequency | 150 kHz |
| Output signals | A, B, Z A, B, Z + complement |
| Output stages | Linedriver/RS422 Push-pull short-circuit proof |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Technical data — mechanical design | |
| Size (flange) | 2.5 x 2.5″ (63.5 x 63.5 mm) |
| Shaft type | 0.375″ ( 9.52 mm) solid shaft |
| Shaft loading | 80 lbs (350 N) axial/radial 100 lbs (450 N) axial or 150 lbs (670 N) radial |
| Bearing life | 1.6 x 1010 rev. at 10 % of rated shaft loading (8 lbs axial/radial) |
| Flange | Clamping flange square 2.5″ x 2.5″ (63.5 x 63.5 mm) |
| Protection DIN EN 60529 | IP 54 (without shaft seal) IP 67 (with shaft seal) |
| Operating speed | 10000 rpm (IP 54) 6000 rpm (IP 67) |
| Starting torque | 0.015 Nm (IP 54) 0.03 Nm (IP 67) |
| Rotor moment of inertia | 14.5 gcm |
| Materials | Housing: aluminium Flange: aluminium |
| Operating temperature | -30…+100 °C (5 VDC) -30…+85 °C (24 VDC) |
| Relative humidity | 95 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 10-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms |
| Connection | MIL-connector, 7-pin MIL-connector, 10-pin Cable 1 m |
| Weight approx. | 12.5 oz. 350 g |