Technical data — electrical ratings
Voltage supply 4.75…30 VDC
Reverse polarity protection Yes
Short-circuit proof Yes
Consumption w/o load 70 mA
Initializing time 30 ms after power on
Pulses per revolution 1…65536
Scan ratio 45…55 % typical at 2048 ppr
Reference signal Zero pulse 90° or 180°
Sensing method Optical
Output frequency 300 kHz (TTL)
160 kHz (HTL)
Output signals A+, B+, R+, A-, B-, R-
Output stages TTL/RS422
HTL/push-pull
Programmable
parameters
Output level TTL/HTL
Pulse number 1…65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-3
Approval UL 508 / CSA 22.2
Technical data — mechanical design
Size (flange) 58 mm
Shaft type 10 x 20 mm, solid shaft with edge (clamping flange)
Shaft loading 40 N axial
80 N radial
Protection DIN EN 60529 IP 65 (without shaft seal)
IP 67 (with shaft seal)
Operating speed 6000 rpm (+20 °C, IP 67)
12000 rpm (+20 °C, IP 65)
Starting torque 0.015 Nm (+20 °C, IP 65)
0.02 Nm (+20 °C, IP 67)
Materials Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel
Operating temperature -40…+100 °C
Relative humidity 90 % non-condensing
Resistance DIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 300 g, 6 ms
Connection Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Weight approx. 300 g